U.S. Solid normally open (N/O) electric solenoid valve is constructed with a durable brass body, one-quarter inch (1/4") female threaded (NPT) connections, and heat and nitrile rubber (NBR) seal. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.
Brand: U.S. Solid
Flow Aperture: 1.6 mm
Body Material: Brass
Gasket / Diaphragm / Seal: NBR
Rated voltage: AC 110 V, Â± 10%
Current: 0.109 A
Power rating: 13.4 VA
Operation Type: Direct Lift Valve
Operation Mode: Normally Open
Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water);
Flow capacity: 0.14 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
Flow value: 0.14 Cv
Minimum operational temperature: 23 degrees Fahrenheit (-5 degrees Celsius)
Maximum operational temperature: 176 degrees Fahrenheit (80 degrees Celsius)
Suitable Media: Air, water, natural gas, etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.
Manufactured in China. Quality assurance and/or conformity managed in accordance with standards:
ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.
Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.