About Ram-Pro 3 Piece Offset O2 Sensor remover amp; installer Socket Set.
Is your "Check Engine Light" on? It may be a bad O2 Sensor amp; you have to change it right away.
Want to Change it? O2 sensors are usually a pain to remove after about 100k+ miles of heat, amp; having them under the hood for some applications make them difficult to reach in tight spots.
BUT With this 3 Pc Upstream socket set youâll be able to remove amp; install hex vacuum switches amp; O2 sensors on almost every vehicle easily.
Designed with mechanics in mind, this socket set works quickly amp; efficiently in the tight space around an O2 sensor to remove or install fast.
On the Vacuum Socket a side cutout allows you to easily slip the socket onto the sensor, preventing damage to wires.
Three configurations fit many applications (7/8" or 22 mm sensors).
(1) 3/8" Drive x 7/8" Vacuum Switch Socket, (2) 3/8" Drive x 7/8" O2 Sensor Sockets.
Constructed of vanadium amp; molybdenum steel for strength amp; durability amp; a black oxide finish.
The hardest part of changing an O2 sensor is removing the old sensor, but with this Ram-Pro tool the sensor will get out easily.
The long socket can be used to remove the sensor amp; the short for tightening.
TIPS: Use penetrating oil at least 24 hours prior to removal to make the job easier amp; more efficient.
When using the shorter wrench socket make sure you have a firm grip amp; it turns so you won't strip the sensor.
"p""b"Benefits:Removes even rusted sensors"br"Great tight fit"br"Outstanding Performance"br"Convenient Storage"br"Includes Instructions"br"Comes in a nice case to keep the 3 sockets together"br"Super tool to have if you do your own auto work"br"Saves hundreds of dollars by doing the change yourself"br"Socket selection will make sensor removals painless"br"You may not need it for some time, but when you do, this is really handy"br"A must have for DIY mechanics